Firmware Compatible With Models

3.2.3.3, 3.2.3.6, 3.2.3.7, 3.2.3.8, 3.2.4.1, 3.2.4.2, 3.2.4.8, 3.2.4.9

Price - 5 USD

How To Make Fix Firmware Pantum

Firt You need to download program -> NOCHIP

Connect your Pantum printer or MFP to your computer with a USB cable. Run the program NoChipFirmwareUpgrade4. Next, click the “Get Printer ID” button and wait for the information to be received. At the top of the window, a unique printer identifier (ID) will be displayed, which is required to generate the Pantum Firmware Fix. You need to copy it (Copy ID) or save it to a file (Save ID to File), then insert a unique ID into the Identifier (ID) field.

Firmware Instruction!!!

1. Remove the side cover from the USB cable connection side.

2. Close (with tweezers) contacts CN2 and turn on the printer

3. The device should turn on in Bootloader Mode, this can be checked by clicking the “Get Printer ID” button in the program

4. Press the “Upgrade Firmware” button and select the P2500_3.A.0.3_Boot.bin file

5. Wait about 30 seconds for the green bar at the bottom of the program to fill up. After that, turn off (by holding the power button for 5 seconds, or by disconnecting from the mains) and turn on the device again. Now the device should go into Bootloader mode on its own.

6. After all this, you can send chipless firmware by clicking “Upgrade Firmware” and selecting the file NoChip_XXXXXXXXXXX_P2200_3.A.0.3.fwr. The firmware process can be quite lengthy, 5-10 minutes. After successful completion, the bar at the bottom of the program will be completely filled and the device will reboot itself. After flashing, the chip on the cartridge is ignored. The toner level will constantly show 100%. It is not necessary to stick or remove the chip



    Send Us printer ID from program, for check and make fix firmware!

    Submit a firmware request To order the firmware, fill in the required fields of the form, or send the necessary data to the email address of the site.

    Lead time From the moment of receiving the prepayment - 5-10 minutes. (with rare exceptions), and a link to download the archive with the firmware will be sent to your email address, which is specified in the application.

    Therefore, in order to reduce time, payment can be made immediately after receiving a response letter to the application from us.

    The letter you will receive after completing the application will contain further instructions for you.